Ceiling fan light use in the life

With the progress of the times and the development of science and technology, various kinds of lamps and lanterns appear in people's lives, satisfying people's different needs. The emergence of lamps and lanterns has brought about a new stage of development for human civilization. More and more types of lamps and lanterns are appearing in people's lives. Many families now use ceiling fan lights, and fashion is pursued by many consumers. The following small series introduces the proper use of the ceiling fan light use in the life.

Ceiling light type

1, wall control

It is on the wall to adjust and control the light. The speed control knob and the light switch are all on the same panel. You can also install the light switch separately.

2, pull rope way

There are two drawstrings on the ceiling fan. One control light controls the fan position, and the lights and fans do not affect each other. It can be installed without multiple wiring.

3, remote control

Use the remote control to adjust the speed and switch light to facilitate control. Some remote controls also have a timer function. At night, you can sleep on the fan. The installation is to install the receiver in the top seat, so that it can be installed with only one route without additional wiring.

The correct use of ceiling fan lights

1. Check whether the ceiling fan suspension is reliable before use every year. The installation of ceiling fans is best to use the steel bar hooks in the prefabricated ceiling panels. If no steel bars are left in the ceiling, use steel reinforcements with a diameter of about 8 mm. Do not plan to save time. Use multiple strands of wire after stranding and lifting. This is very dangerous. When installing a ceiling fan, pay special attention to the following: The rubber roller on the ceiling fan is used for shock absorption and should not be lost.

2, before use, it is best to run under the ceiling fan without anyone. Through the trial run, see if there is no smooth jitter or smoke during rotation, if there is any abnormal sound, or if there is no smell of coke. If jitter, noise, odor, etc., are found during the test run, use should be immediately stopped and the cause must be fixed before repair.

3. When starting an electric fan, many people are accustomed to starting with a slow gear, thinking that this will not only save power, but also protect the parts and prolong their service life. In fact, this is counter-productive. You should start the fan with a fast gear first. At the same time, it should be noted that frequent starts will also cause the motor to overheat and shorten its service life.

4. For continuous operation of the ceiling fan, after stopping for 2 to 3 hours, stop and dissipate the heat for a while to prevent the motor from overheating and burn; use abnormalities in the process and immediately switch off the power.

If You want to know more about yourself, you can follow the information on this site.