Higher Cost Performance Home Ceiling Fan Installation Guide

It is forbidden to change the angle of the blade; the fixing screws of the blade should have anti-loosening devices; the length of the mesh between the boom and the fan (motor) should not be less than 20mm at each end, and anti-loosening devices should be installed. The wiring is correct, and the fan blade should not vibrate significantly during operation.

Reliable Home Ceiling Fan hooks install on existing concrete structures or on existing concrete structures on beams. Hooks should be installed together with civil works. The hooks buried in this way are very firm. The hooks are pre-buried in the cast-in-place beams or floor slabs, and the hooks are made of steel bars with a diameter of 8-10mm.
When installing the hook on the perforated prefabricated plate, first punch a hole in the prefabricated plate, and the hole needs to be placed at the position where the prefabricated plate has a hole, and then install the hook.